H&R VTF ADJUSTABLE SPRINGS FOR BMW M4 (G82/G83) AND BMW M3 (G80)

Making a powerful impression! The BMW M4 (G82) with H&R VTF adjustable springs, H&R spacers and lots of M-Performance Parts.

Maximum driving dynamics and traction for your M-model?
With VTF adjustable springs from H&R, your “M” will reward you with an extra dose of agility, an agressive appearance and impressive performance.

QUALITY & PERFORMANCE MADE IN GERMANY

H&R VTF adjustable springs have a part approval and are the perfect solution when it comes to variable lowering while using the standard shock absorbers! The height-adjustable spring sets are now available for the current BMW M4 (G82/G83) and BMW M3 (G80).

The perfect product for BMW M enthusiasts – also for vehicles with electronic shock absorbers!

The conversion is easier than you might think. The BMW M suspension is removed – the original springs, dust cover and spring plates are dismantled. Then the H&R adjustment unit is fitted to the front axle. This replaces the standard spring plate. Ready!

Lowering specification & part numbers:

On our development vehicle, 11 mm spacers each wheel were fitted to both axles.

Tieferlegungsangabe & Artikelnummern:

H&R VTF adjustable sport springs

They already provide more driving performance for everyday use without a significant loss of comfort.

Part no.: 23026-1
BMW M3 sedan & M4 Coupe incl. Competition, 2WD
*Type G234M (G80 / G82)
*only with adaptive M suspension
FA: 25 – 35 mm / RA: 25 – 40 mm

Part no.: 23026-2
BMW M3 sedan & M4 Coupe xDrive, incl. Competition, 4WD
*Type G234M (G80 / G82)
*only with adaptive M suspension
FA: 25 – 35 mm / RA: 30 – 45 mm

Part no.: 23026-2
BMW M4 Convertible xDrive, incl. Competition, 4WD
*Type G234M (G83)
*only with adaptive M suspension
FA: 25 – 35 mm / RA: 30 – 45 mm

H&R TRAK+ Wheel spacers

Part no.: 2255664 (silver) or B2255664 (black)
Widening per axle 22 mm
with part approval
System: DR | Bolt pattern: 112
Number of holes 5 | Hub centring: FA 66,5 / RA 66,5
Offset limit: FA 5 / RA 5

Part no.: 55664-11 (silver) or B55664-11 (black)
Widening per axle 22 mm incl. screws
with part approval & ABE
System: DR-ABE | Bolt pattern: 112
Number of holes 5 | Hub centring: FA 66,5 / RA 66,5
Offset limit: FA 5 / RA 5

further widenings available.