Skip to content
Coil-Over Suspension,Lowering Springs,Stabilizer,VTF - adjustable springs

Big Box Power-Van: The VW Bus T6.1 with H&R coil over

The angular all-time classic in the Volkswagen program has a huge fan base. They use it very differently thanks to the infinite number of variants. When it comes in the rare Abt-Sportsline dress, it becomes elitist. And with a H&R coil over suspension on board really sporty.

The vehicle’s centre of gravity is lowered by up to 90 millimetres, and the desired height can be adjusted freely. The lateral inclination in fast-driven curves is noticeably reduced, the steering behaviour much more direct. Nevertheless, the driving comfort on long-distance travel level and the payload remains unchanged to the series.

With the optionally available TRAK+ wheel spacers made of high tensile-strength aluminium, both standard and aftermarket wheels can be aligned to the fender edges with millimetre precision.
Alternatively, H&R supplies lowering springs, height adjustable springs and sport stabilizers that ensure an absolutely individual suspension setup.

All H&R components always have the necessary part approvals and are made in Germany!

More information on the H&R social media channels:
FACEBOOK ➤ https://www.facebook.com/hr.dasfahrwerk 
INSTAGRAM➤ https://www.instagram.com/hrspezialfedern/
YOUTUBE ➤ https://www.youtube.com/user/hrspezialfedern


H&R suspension components for VW Bus T6.1, type 7HMA / 7HC /7J0, 2WD + 4WD,
from year of construction 2019

Monotube coil over suspension
Only for vehicles with a cylindrical front strut clamp
Including dynamic and sport suspension, not for bad road suspension
Part No.: 29267-5
Lowering: front approx. 65-90 mm / rear approx.60-80 mm

Monotube coil over suspension
Only for vehicles with front strut clamp bracket
Including dynamic and sports suspension, not for bad road suspension
Part No.: 29267-6
Lowering 65-90 mm in front and 60-80 mm at the back

Lowering springs
for Multivan, Transporter, Kombi, California and California Beach, including dynamic & sport suspension, not for bad road suspension
Part No.: 29270-7
Lowering: front/rear approx.35 mm (for Multivan, Transporter, Combi)
front about 50 mm / rear about 30 mm (for California + California Beach)

Height adjustable springs
for Multivan, Transporter, Combi, California and California Beach
including dynamic & sport suspension, not for bad road suspension
Part No.: 23016-2 (front not height adjustable)
Lowering: front approx.45mm / rear approximately 20-50 mm (for Multivan, Transporter, Combi)
front approx. 50 mm / rear approx.20-50 mm (for California and California Beach)

Stabilizer set,
only for vehicles without LED headlights
Part No.: 33267-3
Diameter: FA ø 30 mm, 2-times adjustable
RA ø 30 mm, not adjustable

Stabilizer set
Part No.: 33267-4
Diameter: FA ø 30 mm front, 2-times adjustable
rear ø 30 mm rear, not adjustable

TRAK+ wheel spacers
Width from 10 mm (per axle)

____________________________________

Ansprechpartner für Presseanfragen:

Mediaart GmbH
Kommunikation & Design
Harry Hoffmann
Kirchstr.57
D-45699 Herten / Germany
Tel.:0049 (0)2366/37226
[email protected]

Do you have a question or need assistance?

About H&R

H&R Spezialfedern GmbH & Co.KG is one of the leading manufacturers of high-quality suspension components for automobiles. The current product range includes parts for a wide range of models and is being continuously expanded. Around 100 employees develop and produce lowering springs, shock absorbers, sports and coil over suspensions, wheel spacers and other components such as stabilisers, to the highest quality standards. H&R also manufactures compression and tension springs for industrial applications. At its headquarter in Lennestadt (German Sauerland region), the company manufactures quality products for customers and clients in over 70 countries worldwide under the H&R brand name. In North America, H&R is represented by its own subsidiary.

 

H&R Spezialfedern GmbH & Co. KG
Elsper Straße 36
D-57368 Lennestadt
[email protected]
www.h-r.com