FORD RANGER RAPTOR with H&R raising springs
The Ford Ranger Raptor is a true off-roader. Irrespective of the ground conditions, the Raptor can also dig its way through the toughest terrain. Its V6 Eco boost delivers almost 500 Nm to the crankshaft , so power is guaranteed in every situation.
H&R has developed raising springs for the Raptor, which significantly increase the ground clearance (front +40mm /rear +30mm) and guarantee that it really goes across country. After all, the “Baja” driving mode is no coincidence. Of course the FOX standard shock absorbers remain on board. For lasting grip OZ Racing Rally Raid wheels (8.5×18) are provided with chunky Generaltire off-road tires filling the wheel arches.
Nomen est Omen: The bike on the loading area is of course not off the rack either. The “OZ Racing Bike E-Raid Full Suspension” is equipped with shock absorbers using H&R Bike Performance Springs.
Technical data:
Ford Ranger Raptor [Type 2AB, 4WD]
Engine: 3.0l gasoline EcoBoost 292 hp / 491 nm
Suspension: H&R raising springs
Part no.: 28562-1
Raising: front + 40 mm / rear + 30 mm
Wheels: OZ Racing Rally Raid 8.5J x 18” ET 47
Tires: Generaltire Grabber X3
front: 33×12.50 R18LT118Q
rear: 33×12.50 R18LT118Q
Extras: Taubenreuther Rhino Rack Xtray roof steel luggage basket, additional headlights, bull bars, bike holder
Bike: OZ Racing Bike E-Raid Full Suspension conversion:
Suspension shock absorber + H&R Bike Performance Springs
____________________________________
Photo credits: H&R Spezialfedern GmbH & Co KG,
Free for use, specimen copy requested
Mediaart GmbH
Kommunikation & Design
Harry Hoffmann
Kirchstr.57
D-45699 Herten / Germany
Tel.:0049 (0)2366/37226
[email protected]
Do you have a question or need assistance?
About H&R
H&R Spezialfedern GmbH & Co.KG is one of the leading manufacturers of high-quality suspension components for automobiles. The current product range includes parts for a wide range of models and is being continuously expanded. Around 100 employees develop and produce lowering springs, shock absorbers, sports and coil over suspensions, wheel spacers and other components such as stabilisers, to the highest quality standards. H&R also manufactures compression and tension springs for industrial applications. At its headquarter in Lennestadt (German Sauerland region), the company manufactures quality products for customers and clients in over 70 countries worldwide under the H&R brand name. In North America, H&R is represented by its own subsidiary.
H&R Spezialfedern GmbH & Co. KG
Elsper Straße 36
D-57368 Lennestadt
[email protected]
www.h-r.com